Floor Scrubber and Sweeper Experts Since 1994

You have no items in your shopping cart.
CALL NOW: (800) 793-3790

Tennant T12 Ride-On Floor Scrubber

T12

The T12 is a compact high-performance ride-on scrubber engineered for easy operation and maintenance. This scrubber boasts the remarkable ability to clean virtually any hard floor surface. With its innovative front drive/steer system and compact size, this rider scrubber can effortlessly access spaces where a full-size walk-behind scrubber can go. The T12 delivers exceptional cleaning results, and with the optional ec-H2O™ technology you can save money and promote a safer, more eco-friendly cleaning process in your facility.

Request a Quote

The T12 is available with your choice of a disk scrub deck or a cylindrical scrub/sweep deck. With the cylindrical scrub deck, manual sweeping is virtually eliminated. Take advantage of the optional scrubbing side brush, which expands the cleaning path from 32 inches to a whopping 41 inches – an impressive 28% wider! This means you can cover more ground efficiently, while the optional integrated vacuum wand allows you to effortlessly tackle spot-cleaning and spills with ease.

Increase Your Cleaning Potential

With fully charged batteries, the T12 will clean for up to two and a half hours. Run time can be increased up to four and a half hours with the optional battery pack upgrade. Power key ignition switch, and emergency power kill switch are both standard features on the this machines dashboard. An integrated operator safety switch stops the machine unless the operator is seated.

The XP version of the T12 moves most of the dashboard controls to a simple touch pad mounted in the steering wheel center. Powerful AC drive propel motor allows for excellent ramp climbing capabilities. Because the AC drive propel motor is sealed and brushless, it offers extended component life, and less maintenance.

A Machine Designed With The Operator in Mind

Experience enhanced convenience and ease of use with the T12's thoughtfully engineered design. The improved cab forward design ensures easy operator ingress and egress from either side of the machine, facilitating smooth transitions during cleaning tasks. With ample operator legroom, fatigue is minimized, enabling extended cleaning sessions without discomfort. Benefit from the excellent operator visibility, empowering you to maneuver confidently even in tight or congested areas. What sets this scrubber apart is its car-like pedals, allowing easy single foot operation, unlike other scrubbers that require both feet to operate. With the T12, not only is the operation effortless, but it's designed to simplify maintenance and ensure smooth performance.

Quality You Can Trust

With cast aluminum drive system, cast aluminum cylindrical brush deck, and cast aluminum squeegee assembly the T12 is corrosion resistant. Further corrosion resistance is enhanced by the rotationally molded polyethylene body panels, and solution/recovery tanks. Steel components on the T12 are coated with industrial grade enamel paint.

Customized Options For Your Floors

The T12 features a large green 1-step start button on the dashboard, allowing you to activate preset scrub functions effortlessly. Once set, this button is all you need, while each function can be controlled independently as needed, giving you full control over your cleaning operations. You'll also find a standard "economy" setting for brush pressure and solution flow, optimizing resources by increasing run time, decreasing brush wear, and reducing water/detergent consumption.

With Tennant's advanced ec-H2O technology system onboard, water is electrically converted into a powerful cleaning solution, significantly reducing water consumption and ensuring floors are drier and ready for immediate traffic. Certified by the National Floor Safety Institute (NFSI) for slip-and-fall accident prevention and meeting NSF International's food safety regulations, ec-H2O is a reliable choice for maintaining a safe and hygienic environment. Plus, adopting ec-H2O can contribute to LEED points in your facility, highlighting your commitment to sustainability.

As an added advantage, the T12 offers the popular and useful Hydrolink battery watering system. This system ensures that your batteries are always filled to the correct level, helping extend battery life and ensuring uninterrupted cleaning performance. Simple to use and requiring no special training or tools, the Hydrolink battery watering system enhances the overall efficiency of your cleaning operations.

This highly versatile scrubber can be used in a wide variety of applications:

Industrial Applications

  • Manufacturing
  • Public Transportation
  • Distribution
  • Machine Shops
  • Warehousing
  • Parking Garage/Lot
  • Steel Service Centers
  • Food Plants
  • Automobile Dealerships

Commercial Applications

  • Schools/Universities
  • Office Buildings
  • Hospitals
  • Rental Centers
  • Casinos
  • Apartment Complexes
  • High Rise Developements
  • Airports
  • Nursing Care Facilities
T12 Battery-Powered, Rider Floor Scrubber Features:
  • 32" Cleaning path
  • Disk or cylindrical scrub head
  • 35-Gallon solution tank
  • 44-Gallon recover tank
  • 9-Gallon demisting chamber
  • 65" Water lift
  • (2) 1.0 HP brush motors
  • 14,500 RPM vacuum fan
  • Optional ec-H2O chemical-free cleaning
  • Operates at 63 dBA
  • Touch-n-Go easy control panel, horn button
  • Dura-TrakTM parabolic squeegee system
  • On-board diagnostics
  • No-tool squeegee change
  • Variable forward and reverse speeds
  • 0.8 HP vacuum fan
  • Variable down pressure
  • Automatic smart battery charger
  • Key switch & Emergency stop button
  • No tool brush & Squeegee change
  • Dimensions: 68" L x 39" W x 56" H, weighing 1460 pounds
  • Hour meter
Resources
  • img

    T12 Battery-Powered, Rider Floor Scrubber User Manual

    Download
  • img

    T12 Battery-Powered, Rider Floor Scrubber Parts Manual

    Download
  • img

    T12 Battery-Powered, Rider Floor Scrubber Brochure

    Download
Common Replacement Parts
Description Model SKU/EAN Price Quantity Add
Description: DISC, 0.06, 04.39D 01.67B, 4/.30H 3.8BC SKU/EAN: 30253
Price: $21.60
Quantity: 1

Description: PLUG, HOLE, RND, 1.25H .03-.08, BLK PYE Model: 7300, 8300, T12, T16, T17, T7, 7100 SKU/EAN: 50967
Price: $2.90
Quantity: 1

Description: SEAL, AFMKT, RBR, OPEN, ADH, 03FT Model: T12 SKU/EAN: 1046421
Price: $58.40
Quantity: 1

Contact Us

Inquire about a machine

Do You Have a Question?